Poster Presentation
Authors: Uciel Garcia Olmedo (Montana State University) , Skylar Tamke (Montana State University)
One of the greatest challenges with camera systems on High-Altitude Balloons (HAB) is to control the direction that they point. This is because the payload boxes constantly rotate during the flight. While mechanical gambles are normally used, an electronic gambled was designed using multiple cameras and a series of multiplexers. The design consists of 8 version 1 pi cameras, connected through a series of multiplexers and interfacing with an IMU to tell the direction the cameras are facing. This design attaches to the Raspberry Pi through the GPIO pins. The multiplexers turn on the camera facing the orientation desired and send the video data to the Raspberry pi, which then send the data to the ground station through a 5.8 GHz modem.
Keywords:
How to Cite: Garcia Olmedo, U. & Tamke, S. (2017) “Multiple Camera Control Using an Octaplexer in a 5.8 GHz Video System”, Academic High Altitude Conference. 2017(1). doi: https://doi.org//ahac.9773