None

Study on quantitative detection of lamination defect in thick-walled metallic pipe by using circumferential guided waves

Authors: Ziming Li (Beijing University of Technology) , Zenghua Liu (Beijing University of Technology) , Cunfu He (Beijing University of Technology) , Bin Wu (Beijing University of Technology)

  • Study on quantitative detection of lamination defect in thick-walled metallic pipe by using circumferential guided waves

    None

    Study on quantitative detection of lamination defect in thick-walled metallic pipe by using circumferential guided waves

    Authors: , , ,

Abstract

In thick-walled pipe, lamination defect is one type of commonly appeared defects in the manufacturing process. This paper presents a quantitative detection method of lamination defect in thick-walled metallic pipe using circumferential Lamb waves based on wavenumber analysis algorithm. A 3D finite element model is established, and an experimental study is performed with the same setting as the numerical study. Both the numerical result and experimental result are consistent with each other. The reconstructed values show that the lamination is located near the outer surface at nearly about 2.3 mm, which gives a relative error of 15%.

How to Cite:

Li, Z. ., Liu, Z. ., He, C. . & Wu, B. ., (2019) “Study on quantitative detection of lamination defect in thick-walled metallic pipe by using circumferential guided waves”, Review of Progress in Quantitative Nondestructive Evaluation .

Downloads:
Download PDF

92 Views

78 Downloads

Published on
03 Dec 2019
Peer Reviewed
License